Contents
  1. Specifications
  2. What the preheater does
  3. Strengths and limitations
  4. Complete setup
  5. Alternatives
  6. Our recommendation

Quick verdict

The 58 Plus 2 is Flair's most capable lever maker. It uses standard 58 mm baskets and has an integrated preheat controller with Low, Medium and High settings that warm the brew cylinder. Flair's support article describes it as a cylinder heater, so you still pour hot water from a kettle. It suits people committed to lever espresso who want 58 mm accessory compatibility and less preheating fuss. We found no Amazon listing, so this review links Flair's page.

Buy it if

  • You want lever espresso with standard 58 mm tampers, screens and baskets.
  • Preheating the cylinder by kettle feels like a chore.

Skip it if

  • You want a machine that heats its own water.
  • Counter space is tight; it is 17.5 × 13 × 6.5 in and 12 lb.
Best for
Lever users who want standard 58 mm accessories and less preheating hassle.
Main compromise
Largest and heaviest Flair here; the preheater warms the cylinder, but water still comes from a kettle.
Basket
58 mm; high-dose, low-dose and pressurized baskets
Dose
16–20 g
Heating
Integrated brew-cylinder preheater, Low/Medium/High; water from a kettle

Specifications

Flair 58 Plus 2 specifications and where each figure comes from
SpecDetail and source
Basket58 mm; high-dose, low-dose and pressurized basketsManufacturer: Flair Espresso
Dose16–20 gManufacturer: Flair Espresso
HeatingIntegrated brew-cylinder preheater, Low/Medium/High; water from a kettleManufacturer: Flair Espresso, Flair Espresso support
Water capacity90 ml; yield up to 55 mlManufacturer: Flair Espresso
Pressure feedbackIntegrated gaugeManufacturer: Flair Espresso
Dimensions17.5 × 13 × 6.5 inManufacturer: Flair Espresso
Weight12 lbManufacturer: Flair Espresso
Warranty5-year limitedManufacturer: Flair Espresso
SteamNone; milk drinks need a separate frotherManufacturer: Flair Espresso

What the preheater does

Flair's support article says the controller has three levels matched to roast level. It says to preheat with the lever raised, the plunger at the top of the cylinder and the portafilter installed, to "lock in" heat (Flair support). The article describes heating the cylinder. It does not describe heating water, so plan on a kettle. Flair points to its safety guide for exact times.

Strengths and limitations

What stands out

  • 58 mm baskets: high-dose, low-dose and pressurized included.
  • Integrated cylinder preheater with three settings.
  • 5-year limited warranty.

Limitations

  • Still needs a kettle.
  • Large and heavy for a manual maker.
  • Needs power for the preheater, and the voltage is not listed on the product page.

Complete setup

Alternatives

Our recommendation

I'd suggest the 58 Plus 2 for people who already know they like lever espresso and want 58 mm accessories. Buy direct from Flair or a retailer it lists.

View on Flair's site

Not found on Amazon when we checked.

Sources

  1. Flair 58 Plus 2 — Flair Espresso. Manufacturer. Accessed September 26, 2026.
  2. How do I operate the temp controller? — Flair Espresso support. Manufacturer manual. Accessed September 26, 2026.